Classical Report of Multiple Tables
After creating a classic report for single table it's time
to create a report which will contain multiple tables. Here
we shall fetch various records from various tables and then
collate them to reach required output.
We have created a report which contains multiple tables
like MARA, MARC and MARD. The materials contain different
Plant and Storage Location in MARC and MARD tables
respectively. All those different plant and storage
location will be displayed with material number in output
here.
Here the plant is a big item and the storage location is
small item. One single plant contains different storage
locations. Materials are stored inside one of these storage
locations. Now different materials can be stored in the
same storage location.
In the program we have prepared internal table it_mara from
MARA table based on the Select Option material number
range. If material number is entered then only the program
will give an output.
After preparing valid information of it_mara the program
selects data from MARC (plant) table into it_marc for all
entries in it_mara. Here we have to check the it_mara table
if it is not initial. If we don't give this checking then
all records will be selected from MARC table and that would
be wrong. Hence we can say that this table checking is one
of a prerequisites of For All Entries.
Similarly after preparing the it_marc table we shall
prepare the it_mard table from MARD (storage location) for
all entries in it_marc. Similarly the table checking of
it_marc must be there.
Now we have material (it_mara), plant (it_marc) &
storage location (it_mard) information. We have to collate
all these information to display the required output. To do
this we have prepared an internal table it_out with an work
area wa_out. This internal table & work area contains
the structure ty_out as per the report output requirement.
Now we are looping it_mara to fetch material & type
into the output work area. Here MARA is a master table
hence we have to loop this table. Now one material can be
maintained for different storage locations under one plant
or different plant. Hence to populate output table we have
to loop into it_marc and it_mard table. Here we are looping
it_marc and it_mard with WHERE clause because we are going
to fetch all records of plant and storage location at one
time. So where clause will help us to point out the
particular material and also will increase the performance.
Finally at the output population we have used control break
statement like AT FIRST, AT END OF, AT LAST. With the help
of that we have synchronized the output in different lines.
Following is the coding of the classical report.
REPORT zabap_gui.
*-------Declaring the line type of database
tables---------------------*
TABLES: mara, marc, mard.
*------Declaring the types of work areas & internal
tables-------------*
TYPES: BEGIN OF ty_mara,
matnr TYPE mara-matnr,
mtart TYPE mara-mtart,
END OF ty_mara,
BEGIN OF ty_marc,
matnr TYPE marc-matnr,
werks TYPE marc-werks,
xchar TYPE marc-xchar,
END OF ty_marc,
BEGIN OF ty_mard,
matnr TYPE mard-matnr,
werks TYPE mard-werks,
lgort TYPE mard-lgort,
pstat TYPE mard-pstat,
END OF ty_mard,
BEGIN OF ty_out,
matnr TYPE marc-matnr, "Material
werks TYPE marc-werks, "Plant
lgort TYPE mard-lgort, "Storage Location
mtart TYPE mara-mtart, "Material Type
xchar TYPE marc-xchar, "Batch number
pstat TYPE mard-pstat, "Maintenance Status
END OF ty_out.
*-----Declaring work areas & internal
tables---------------------------*
DATA: wa_mara TYPE ty_mara,
wa_marc TYPE ty_marc,
wa_mard TYPE ty_mard,
wa_out TYPE ty_out,
it_mara TYPE STANDARD TABLE OF ty_mara,
it_marc TYPE STANDARD TABLE OF ty_marc,
it_mard TYPE STANDARD TABLE OF ty_mard,
it_out TYPE STANDARD TABLE OF ty_out,
v_prog TYPE sy-repid, "Program name
v_date TYPE sy-datum, "Current date
v_time TYPE sy-uzeit. "Current time
*----------Declaring constants to avoid the hard
codes-----------------*
CONSTANTS: c_material TYPE char12 VALUE 'MATERIAL NO',
c_plant TYPE char5 VALUE 'PLANT',
c_storage TYPE char8 VALUE 'STORAGE',
c_type TYPE char6 VALUE 'M TYPE',
c_batch TYPE char6 VALUE 'BATCH',
c_maint TYPE char18 VALUE 'MAINTENANCE STATUS',
c_end TYPE char40 VALUE 'End of Material Details'.
*------Event
initialization--------------------------------------------*
INITIALIZATION.
v_prog = sy-repid.
v_date = sy-datum.
v_time = sy-uzeit.
*-----------Declaring selection screen with select
option for input----*
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE
text-001.
SELECT-OPTIONS: s_matnr FOR mara-matnr.
SELECTION-SCREEN END OF BLOCK b1.
*-----Event start of
selection-----------------------------------------*
START-OF-SELECTION.
PERFORM get_mara.
PERFORM get_marc.
PERFORM get_mard.
*---Event end of
selection---------------------------------------------*
END-OF-SELECTION.
PERFORM get_output.
PERFORM display.
*---Event top of
page--------------------------------------------------*
TOP-OF-PAGE.
PERFORM top_of_page.
*&---------------------------------------------------------------------*
*& Form GET_MARA
*&---------------------------------------------------------------------*
* Select data from MARA table
*----------------------------------------------------------------------*
FORM get_mara .
IF s_matnr IS NOT INITIAL.
SELECT matnr mtart
FROM mara INTO TABLE it_mara
WHERE matnr IN s_matnr.
IF sy-subrc = 0.
SORT it_mara BY matnr.
ELSE.
MESSAGE 'Material doesn''t exist' TYPE 'I'.
ENDIF.
ENDIF.
ENDFORM. " GET_MARA
*&---------------------------------------------------------------------*
*& Form GET_MARC
*&---------------------------------------------------------------------*
* Select data from MARC table
*----------------------------------------------------------------------*
FORM get_marc .
IF it_mara IS NOT INITIAL. "Prerequisite of FOR ALL ENTRIES IN
SELECT matnr werks xchar
FROM marc INTO TABLE it_marc
FOR ALL ENTRIES IN it_mara
WHERE matnr = it_mara-matnr.
IF sy-subrc = 0.
SORT it_marc BY matnr.
ELSE.
MESSAGE 'Plant doesn''t exist' TYPE 'I'.
ENDIF.
ENDIF.
ENDFORM. " GET_MARC
*&---------------------------------------------------------------------*
*& Form GET_MARD
*&---------------------------------------------------------------------*
* Select data from MARD table
*----------------------------------------------------------------------*
FORM get_mard .
IF it_marc IS NOT INITIAL. "Prerequisite of FOR ALL ENTRIES IN
SELECT matnr werks lgort pstat
FROM mard INTO TABLE it_mard
FOR ALL ENTRIES IN it_marc
WHERE matnr = it_marc-matnr
AND werks = it_marc-werks.
IF sy-subrc = 0.
SORT it_mard BY matnr.
ELSE.
MESSAGE 'Storage Location doesn''t exist' TYPE 'I'.
ENDIF.
ENDIF.
ENDFORM. " GET_MARD
*&---------------------------------------------------------------------*
*& Form GET_OUTPUT
*&---------------------------------------------------------------------*
* Preparing the output table by using Loop
*----------------------------------------------------------------------*
FORM get_output .
IF it_mara IS NOT INITIAL.
LOOP AT it_mara INTO wa_mara.
wa_out-matnr = wa_mara-matnr.
wa_out-mtart = wa_mara-mtart.
LOOP AT it_marc INTO wa_marc
WHERE matnr = wa_mara-matnr.
wa_out-werks = wa_marc-werks.
wa_out-xchar = wa_marc-xchar.
LOOP AT it_mard INTO wa_mard
WHERE matnr = wa_marc-matnr
AND werks = wa_marc-werks.
wa_out-lgort = wa_mard-lgort.
wa_out-pstat = wa_mard-pstat.
APPEND wa_out TO it_out.
CLEAR: wa_out, wa_mara, wa_marc, wa_mard.
ENDLOOP.
ENDLOOP.
ENDLOOP.
ENDIF.
ENDFORM. " GET_OUTPUT
*&---------------------------------------------------------------------*
*& Form DISPLAY
*&---------------------------------------------------------------------*
* Displaying the classical output by using WRITE
statement
*----------------------------------------------------------------------*
FORM display .
IF it_out IS NOT INITIAL.
LOOP AT it_out INTO wa_out.
AT FIRST.
"Control break statement – display one time at first
WRITE: / c_material,
21 c_plant,
27 c_storage,
37 c_type,
45 c_batch,
54 c_maint.
ULINE.
SKIP.
ENDAT.
WRITE: / wa_out-matnr,
21 wa_out-werks,
27 wa_out-lgort,
37 wa_out-mtart,
45 wa_out-xchar,
54 wa_out-pstat.
IF wa_out-matnr IS INITIAL.
AT END OF matnr. "Control break statement
SKIP.
ENDAT.
ENDIF.
AT LAST.
"Control break statement – display one time at last
ULINE.
WRITE: / c_end.
ENDAT.
ENDLOOP.
ENDIF.
ENDFORM. " DISPLAY
*&---------------------------------------------------------------------*
*& Form TOP_OF_PAGE
*&---------------------------------------------------------------------*
* Top of page of Classical output
*----------------------------------------------------------------------*
FORM top_of_page .
WRITE: / v_prog,
/ v_date DD/MM/YYYY,
/ v_time.
ULINE.
ENDFORM. " TOP_OF_PAGE
Output:
1. Selection Screen -
2. Classical Display -
After creating a classic report for single table it's time
to create a report which will contain multiple tables. Here
we shall fetch various records from various tables and then
collate them to reach required output.
We have created a report which contains multiple tables like MARA, MARC and MARD. The materials contain different Plant and Storage Location in MARC and MARD tables respectively. All those different plant and storage location will be displayed with material number in output here.
Here the plant is a big item and the storage location is small item. One single plant contains different storage locations. Materials are stored inside one of these storage locations. Now different materials can be stored in the same storage location.
We have created a report which contains multiple tables like MARA, MARC and MARD. The materials contain different Plant and Storage Location in MARC and MARD tables respectively. All those different plant and storage location will be displayed with material number in output here.
Here the plant is a big item and the storage location is small item. One single plant contains different storage locations. Materials are stored inside one of these storage locations. Now different materials can be stored in the same storage location.
In the program we have prepared internal table it_mara from
MARA table based on the Select Option material number
range. If material number is entered then only the program
will give an output.
After preparing valid information of it_mara the program
selects data from MARC (plant) table into it_marc for all
entries in it_mara. Here we have to check the it_mara table
if it is not initial. If we don't give this checking then
all records will be selected from MARC table and that would
be wrong. Hence we can say that this table checking is one
of a prerequisites of For All Entries.
Similarly after preparing the it_marc table we shall
prepare the it_mard table from MARD (storage location) for
all entries in it_marc. Similarly the table checking of
it_marc must be there.
Now we have material (it_mara), plant (it_marc) & storage location (it_mard) information. We have to collate all these information to display the required output. To do this we have prepared an internal table it_out with an work area wa_out. This internal table & work area contains the structure ty_out as per the report output requirement.
Now we have material (it_mara), plant (it_marc) & storage location (it_mard) information. We have to collate all these information to display the required output. To do this we have prepared an internal table it_out with an work area wa_out. This internal table & work area contains the structure ty_out as per the report output requirement.
Now we are looping it_mara to fetch material & type
into the output work area. Here MARA is a master table
hence we have to loop this table. Now one material can be
maintained for different storage locations under one plant
or different plant. Hence to populate output table we have
to loop into it_marc and it_mard table. Here we are looping
it_marc and it_mard with WHERE clause because we are going
to fetch all records of plant and storage location at one
time. So where clause will help us to point out the
particular material and also will increase the performance.
Finally at the output population we have used control break
statement like AT FIRST, AT END OF, AT LAST. With the help
of that we have synchronized the output in different lines.
Following is the coding of the classical report.
REPORT zabap_gui.
*-------Declaring the line type of database
tables---------------------*
TABLES: mara, marc, mard.
*------Declaring the types of work areas & internal tables-------------*
TYPES: BEGIN OF ty_mara,
matnr TYPE mara-matnr,
mtart TYPE mara-mtart,
END OF ty_mara,
BEGIN OF ty_marc,
matnr TYPE marc-matnr,
werks TYPE marc-werks,
xchar TYPE marc-xchar,
END OF ty_marc,
BEGIN OF ty_mard,
matnr TYPE mard-matnr,
werks TYPE mard-werks,
lgort TYPE mard-lgort,
pstat TYPE mard-pstat,
END OF ty_mard,
BEGIN OF ty_out,
matnr TYPE marc-matnr, "Material
werks TYPE marc-werks, "Plant
lgort TYPE mard-lgort, "Storage Location
mtart TYPE mara-mtart, "Material Type
xchar TYPE marc-xchar, "Batch number
pstat TYPE mard-pstat, "Maintenance Status
END OF ty_out.
*-----Declaring work areas & internal tables---------------------------*
DATA: wa_mara TYPE ty_mara,
wa_marc TYPE ty_marc,
wa_mard TYPE ty_mard,
wa_out TYPE ty_out,
it_mara TYPE STANDARD TABLE OF ty_mara,
it_marc TYPE STANDARD TABLE OF ty_marc,
it_mard TYPE STANDARD TABLE OF ty_mard,
it_out TYPE STANDARD TABLE OF ty_out,
v_prog TYPE sy-repid, "Program name
v_date TYPE sy-datum, "Current date
v_time TYPE sy-uzeit. "Current time
*----------Declaring constants to avoid the hard codes-----------------*
CONSTANTS: c_material TYPE char12 VALUE 'MATERIAL NO',
c_plant TYPE char5 VALUE 'PLANT',
c_storage TYPE char8 VALUE 'STORAGE',
c_type TYPE char6 VALUE 'M TYPE',
c_batch TYPE char6 VALUE 'BATCH',
c_maint TYPE char18 VALUE 'MAINTENANCE STATUS',
c_end TYPE char40 VALUE 'End of Material Details'.
*------Event initialization--------------------------------------------*
INITIALIZATION.
v_prog = sy-repid.
v_date = sy-datum.
v_time = sy-uzeit.
*-----------Declaring selection screen with select option for input----*
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_matnr FOR mara-matnr.
SELECTION-SCREEN END OF BLOCK b1.
*-----Event start of selection-----------------------------------------*
START-OF-SELECTION.
PERFORM get_mara.
PERFORM get_marc.
PERFORM get_mard.
*---Event end of selection---------------------------------------------*
END-OF-SELECTION.
PERFORM get_output.
PERFORM display.
*---Event top of page--------------------------------------------------*
TOP-OF-PAGE.
PERFORM top_of_page.
*&---------------------------------------------------------------------*
*& Form GET_MARA
*&---------------------------------------------------------------------*
* Select data from MARA table
*----------------------------------------------------------------------*
FORM get_mara .
IF s_matnr IS NOT INITIAL.
SELECT matnr mtart
FROM mara INTO TABLE it_mara
WHERE matnr IN s_matnr.
IF sy-subrc = 0.
SORT it_mara BY matnr.
ELSE.
MESSAGE 'Material doesn''t exist' TYPE 'I'.
ENDIF.
ENDIF.
ENDFORM. " GET_MARA
*&---------------------------------------------------------------------*
*& Form GET_MARC
*&---------------------------------------------------------------------*
* Select data from MARC table
*----------------------------------------------------------------------*
FORM get_marc .
IF it_mara IS NOT INITIAL. "Prerequisite of FOR ALL ENTRIES IN
SELECT matnr werks xchar
FROM marc INTO TABLE it_marc
FOR ALL ENTRIES IN it_mara
WHERE matnr = it_mara-matnr.
IF sy-subrc = 0.
SORT it_marc BY matnr.
ELSE.
MESSAGE 'Plant doesn''t exist' TYPE 'I'.
ENDIF.
ENDIF.
ENDFORM. " GET_MARC
*&---------------------------------------------------------------------*
*& Form GET_MARD
*&---------------------------------------------------------------------*
* Select data from MARD table
*----------------------------------------------------------------------*
FORM get_mard .
IF it_marc IS NOT INITIAL. "Prerequisite of FOR ALL ENTRIES IN
SELECT matnr werks lgort pstat
FROM mard INTO TABLE it_mard
FOR ALL ENTRIES IN it_marc
WHERE matnr = it_marc-matnr
AND werks = it_marc-werks.
IF sy-subrc = 0.
SORT it_mard BY matnr.
ELSE.
MESSAGE 'Storage Location doesn''t exist' TYPE 'I'.
ENDIF.
ENDIF.
ENDFORM. " GET_MARD
*&---------------------------------------------------------------------*
*& Form GET_OUTPUT
*&---------------------------------------------------------------------*
* Preparing the output table by using Loop
*----------------------------------------------------------------------*
FORM get_output .
IF it_mara IS NOT INITIAL.
LOOP AT it_mara INTO wa_mara.
wa_out-matnr = wa_mara-matnr.
wa_out-mtart = wa_mara-mtart.
LOOP AT it_marc INTO wa_marc
WHERE matnr = wa_mara-matnr.
wa_out-werks = wa_marc-werks.
wa_out-xchar = wa_marc-xchar.
LOOP AT it_mard INTO wa_mard
WHERE matnr = wa_marc-matnr
AND werks = wa_marc-werks.
wa_out-lgort = wa_mard-lgort.
wa_out-pstat = wa_mard-pstat.
APPEND wa_out TO it_out.
CLEAR: wa_out, wa_mara, wa_marc, wa_mard.
ENDLOOP.
ENDLOOP.
ENDLOOP.
ENDIF.
ENDFORM. " GET_OUTPUT
*&---------------------------------------------------------------------*
*& Form DISPLAY
*&---------------------------------------------------------------------*
* Displaying the classical output by using WRITE statement
*----------------------------------------------------------------------*
FORM display .
IF it_out IS NOT INITIAL.
LOOP AT it_out INTO wa_out.
AT FIRST. "Control break statement – display one time at first
WRITE: / c_material,
21 c_plant,
27 c_storage,
37 c_type,
45 c_batch,
54 c_maint.
ULINE.
SKIP.
ENDAT.
WRITE: / wa_out-matnr,
21 wa_out-werks,
27 wa_out-lgort,
37 wa_out-mtart,
45 wa_out-xchar,
54 wa_out-pstat.
IF wa_out-matnr IS INITIAL.
AT END OF matnr. "Control break statement
SKIP.
ENDAT.
ENDIF.
AT LAST. "Control break statement – display one time at last
ULINE.
WRITE: / c_end.
ENDAT.
ENDLOOP.
ENDIF.
ENDFORM. " DISPLAY
*&---------------------------------------------------------------------*
*& Form TOP_OF_PAGE
*&---------------------------------------------------------------------*
* Top of page of Classical output
*----------------------------------------------------------------------*
FORM top_of_page .
WRITE: / v_prog,
/ v_date DD/MM/YYYY,
/ v_time.
ULINE.
ENDFORM. " TOP_OF_PAGE
TABLES: mara, marc, mard.
*------Declaring the types of work areas & internal tables-------------*
TYPES: BEGIN OF ty_mara,
matnr TYPE mara-matnr,
mtart TYPE mara-mtart,
END OF ty_mara,
BEGIN OF ty_marc,
matnr TYPE marc-matnr,
werks TYPE marc-werks,
xchar TYPE marc-xchar,
END OF ty_marc,
BEGIN OF ty_mard,
matnr TYPE mard-matnr,
werks TYPE mard-werks,
lgort TYPE mard-lgort,
pstat TYPE mard-pstat,
END OF ty_mard,
BEGIN OF ty_out,
matnr TYPE marc-matnr, "Material
werks TYPE marc-werks, "Plant
lgort TYPE mard-lgort, "Storage Location
mtart TYPE mara-mtart, "Material Type
xchar TYPE marc-xchar, "Batch number
pstat TYPE mard-pstat, "Maintenance Status
END OF ty_out.
*-----Declaring work areas & internal tables---------------------------*
DATA: wa_mara TYPE ty_mara,
wa_marc TYPE ty_marc,
wa_mard TYPE ty_mard,
wa_out TYPE ty_out,
it_mara TYPE STANDARD TABLE OF ty_mara,
it_marc TYPE STANDARD TABLE OF ty_marc,
it_mard TYPE STANDARD TABLE OF ty_mard,
it_out TYPE STANDARD TABLE OF ty_out,
v_prog TYPE sy-repid, "Program name
v_date TYPE sy-datum, "Current date
v_time TYPE sy-uzeit. "Current time
*----------Declaring constants to avoid the hard codes-----------------*
CONSTANTS: c_material TYPE char12 VALUE 'MATERIAL NO',
c_plant TYPE char5 VALUE 'PLANT',
c_storage TYPE char8 VALUE 'STORAGE',
c_type TYPE char6 VALUE 'M TYPE',
c_batch TYPE char6 VALUE 'BATCH',
c_maint TYPE char18 VALUE 'MAINTENANCE STATUS',
c_end TYPE char40 VALUE 'End of Material Details'.
*------Event initialization--------------------------------------------*
INITIALIZATION.
v_prog = sy-repid.
v_date = sy-datum.
v_time = sy-uzeit.
*-----------Declaring selection screen with select option for input----*
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_matnr FOR mara-matnr.
SELECTION-SCREEN END OF BLOCK b1.
*-----Event start of selection-----------------------------------------*
START-OF-SELECTION.
PERFORM get_mara.
PERFORM get_marc.
PERFORM get_mard.
*---Event end of selection---------------------------------------------*
END-OF-SELECTION.
PERFORM get_output.
PERFORM display.
*---Event top of page--------------------------------------------------*
TOP-OF-PAGE.
PERFORM top_of_page.
*&---------------------------------------------------------------------*
*& Form GET_MARA
*&---------------------------------------------------------------------*
* Select data from MARA table
*----------------------------------------------------------------------*
FORM get_mara .
IF s_matnr IS NOT INITIAL.
SELECT matnr mtart
FROM mara INTO TABLE it_mara
WHERE matnr IN s_matnr.
IF sy-subrc = 0.
SORT it_mara BY matnr.
ELSE.
MESSAGE 'Material doesn''t exist' TYPE 'I'.
ENDIF.
ENDIF.
ENDFORM. " GET_MARA
*&---------------------------------------------------------------------*
*& Form GET_MARC
*&---------------------------------------------------------------------*
* Select data from MARC table
*----------------------------------------------------------------------*
FORM get_marc .
IF it_mara IS NOT INITIAL. "Prerequisite of FOR ALL ENTRIES IN
SELECT matnr werks xchar
FROM marc INTO TABLE it_marc
FOR ALL ENTRIES IN it_mara
WHERE matnr = it_mara-matnr.
IF sy-subrc = 0.
SORT it_marc BY matnr.
ELSE.
MESSAGE 'Plant doesn''t exist' TYPE 'I'.
ENDIF.
ENDIF.
ENDFORM. " GET_MARC
*&---------------------------------------------------------------------*
*& Form GET_MARD
*&---------------------------------------------------------------------*
* Select data from MARD table
*----------------------------------------------------------------------*
FORM get_mard .
IF it_marc IS NOT INITIAL. "Prerequisite of FOR ALL ENTRIES IN
SELECT matnr werks lgort pstat
FROM mard INTO TABLE it_mard
FOR ALL ENTRIES IN it_marc
WHERE matnr = it_marc-matnr
AND werks = it_marc-werks.
IF sy-subrc = 0.
SORT it_mard BY matnr.
ELSE.
MESSAGE 'Storage Location doesn''t exist' TYPE 'I'.
ENDIF.
ENDIF.
ENDFORM. " GET_MARD
*&---------------------------------------------------------------------*
*& Form GET_OUTPUT
*&---------------------------------------------------------------------*
* Preparing the output table by using Loop
*----------------------------------------------------------------------*
FORM get_output .
IF it_mara IS NOT INITIAL.
LOOP AT it_mara INTO wa_mara.
wa_out-matnr = wa_mara-matnr.
wa_out-mtart = wa_mara-mtart.
LOOP AT it_marc INTO wa_marc
WHERE matnr = wa_mara-matnr.
wa_out-werks = wa_marc-werks.
wa_out-xchar = wa_marc-xchar.
LOOP AT it_mard INTO wa_mard
WHERE matnr = wa_marc-matnr
AND werks = wa_marc-werks.
wa_out-lgort = wa_mard-lgort.
wa_out-pstat = wa_mard-pstat.
APPEND wa_out TO it_out.
CLEAR: wa_out, wa_mara, wa_marc, wa_mard.
ENDLOOP.
ENDLOOP.
ENDLOOP.
ENDIF.
ENDFORM. " GET_OUTPUT
*&---------------------------------------------------------------------*
*& Form DISPLAY
*&---------------------------------------------------------------------*
* Displaying the classical output by using WRITE statement
*----------------------------------------------------------------------*
FORM display .
IF it_out IS NOT INITIAL.
LOOP AT it_out INTO wa_out.
AT FIRST. "Control break statement – display one time at first
WRITE: / c_material,
21 c_plant,
27 c_storage,
37 c_type,
45 c_batch,
54 c_maint.
ULINE.
SKIP.
ENDAT.
WRITE: / wa_out-matnr,
21 wa_out-werks,
27 wa_out-lgort,
37 wa_out-mtart,
45 wa_out-xchar,
54 wa_out-pstat.
IF wa_out-matnr IS INITIAL.
AT END OF matnr. "Control break statement
SKIP.
ENDAT.
ENDIF.
AT LAST. "Control break statement – display one time at last
ULINE.
WRITE: / c_end.
ENDAT.
ENDLOOP.
ENDIF.
ENDFORM. " DISPLAY
*&---------------------------------------------------------------------*
*& Form TOP_OF_PAGE
*&---------------------------------------------------------------------*
* Top of page of Classical output
*----------------------------------------------------------------------*
FORM top_of_page .
WRITE: / v_prog,
/ v_date DD/MM/YYYY,
/ v_time.
ULINE.
ENDFORM. " TOP_OF_PAGE
Output:
1. Selection Screen -
2. Classical Display -
No comments:
Post a Comment